Dixon ZTR 8026D - Manual (Page 39)

39
CARE AND MAINTENANCE
LEVELING THE DECK:
1. Set the tire pressure on all four tires.
2. Front casters must be rotated in the direction of
forward travel.
3. Move the tractor to a hard level surface.
4. Put the mower deck in the number 3 deck height
position.
5. Loosen the jam nuts on the front and rear deck
hangers.
6. Rotate the 2 outer spindles so the blades point
outboard.
7. Adjust front hangers to level deck side to side.
8. Rotate all 3 spindles until the blades are fore
and aft.
9. Adjust rear hangers until deck is level to 1/8
higher in the rear.
10. Retighten the jam nuts on the front and rear deck
hangers.