Dixon ZTR 8026D - Manual (Page 16)

16
CONTROLS
SEAT:
Fore & Aft: Move lever, slide seat fore & aft to
desired position. Release.
Seat Damper: A shock is located on the left side
of the seat frame. Remove clip on the top and
pull plunger up. Rotate shaft clockwise to make
ride stiffer and counter-clockwise for a softer ride.
Reattach to seat frame with clip.
Attention: Do not completely close off the
damper. Closing off the damper causes it to
become stiff making it difficult to fully extend the
damper in order to open the adjustment. THE
PRODUCT IS NOT DAMAGED. To restore
adjustment follow these instructions: Hang the
damper in the vertical position with the rod
pointing down. Attach a load of approximately
15 pounds to the rod end of the damper. The
load will slowly extend the damper. When fully
extended the adjustment pin will be engaged.
Turn rod with the weight still hanging to open
the adjustment.