Dixon ZTR 8026D - Manual (Page 15)

15
PARKING BRAKE:
A parking brake is located to the left of the seat.
The engine will kill if control levers are not in the
outboard position when the parking brake is engaged.
To engage brake: pull up and back
To disengage brake: push forward and down
Note: The parking brake is not intended to be used
as a service brake.
Note: Always set parking brake before dismounting.
Release the parking brake before moving mower.
Note: Engage parking brake before starting engine.
MOWER DECK LIFT:
T
he mower lift lever is extra long & has an assist
spring for easy operation.
1) Grasp lever with right hand.
2) Depress thumb lever to release. Move to
desired position.
3) Release lever to lock into position.
Select cut height & insert pin into first hole below the
lift lever. Ten holes are provided for a down stop so
you can easily return from transport to desired cut
height.
CONTROLS