HB Optoelectronic HBP200 User Manual
Page 12
HBP200 DLP Pico Projector User Guide
10
Note: LED Indicator will tell you the operating status of the projector.
Description
Normal Usage
Blinking
— The LED blinking will last for about 5-6 seconds while the
projector has been switched on.
On
—The projector is ready to use after boot up sequences are completed.
Off
—The projector has been switched off.
Abnormal Status
Blinking
—
Circuit Protection: The LED indicator will be blinking when the temperature
of the projector is too high. You will see a warning message as below. The indicator will
be blinking for 10 seconds and then the projector will be off.
Circuit Protection Warning
Message