Guralp Systems Shout - Manual (Page 6)

Send Buffer: Click here to cause the DM to dump the contents of
its silicon file buffer.
3.4.2 Mass form
The positions of the masses in the attached seismometer are dis-
played. Click ‘Done’ when done and you will be returned to the main
DM configuration form. Note that the mass position channels must be
enabled in the mux for this to work.
3.4.3 Lock form
The lock command is issued to the DM and the results are displayed
in the window below, when the sensor has finished locking you can click
‘Done’ to return to the main DM configuration form.
3.4.4 Unlock form
The unlock command is issued to the DM and the results are dis-
played in the window below, when the sensor has finished unlocking you
can click ‘Done’ to return to the main DM configuration form.
6