Guntermann & Drunck UserCenter8 - Manual (Page 8)

Guntermann & Drunck GmbH Operating Instructions UserCenter8
Page 5
6 Setup Mode
With the setup mode you can adapt UserCenter8 exactly to your individual
needs. The following settings can be done via keyboard:
•
Establishing the default condition
•
Changing the keyboard scan code
•
Enabling the hold function
•
GET function
•
Transmission of GDFrames
•
Defining the double hotkey
•
Setting the hotkey
•
Time-out for automatic switch (local/remote)
•
Automatic mouse-enable
•
Automatic mouse-reset
•
Support for the serial Logitech mouse
•
Mouse-enable
•
Mouse-reset
The settings can be done via keyboard. Mouse action during this
procedure is not possible.
The following chapters describe how these settings are activated.
6.1 Default Settings
In default UserCenter8 has the following settings:
•
Keyboard scan code 2
•
Hold function On
•
Transmission of GDFrames On
•
Defined hotkey CTRL
•
Double hotkey Off
•
Time-out for auto switch 1 Second
•
GET function Off
•
Automatic mouse-enable Off
•
Automatic mouse-reset Off
•
Support for serial Logi mouse Off