Guntermann & Drunck UserCenter8 - Manual (Page 10)

Guntermann & Drunck GmbH Operating Instructions UserCenter8
Page 7
6.4 Manual hold function
With this setting you define whether the user can start the hold function with
CTRL + PRINT or not.
For enabling the manual hold function you proceed as follows:
•
Call up the setup mode with CTRL + BACKSPACE
The setup mode will be indicated by the flashing of the three
keyboard LEDs (NUM-Lock, CAPS-Lock, SCROLL-Lock).
•
For enabling press X
•
To disable the manual hold function again press C
After the manual hold function is enabled/disabled the setup mode will be
closed automatically. The keyboard LEDs stop flashing.
You can always stop the entry by pressing
ESC .
6.5 GET function
With this setting you define whether the GET function will be activated or not.
For activating the GET function proceed as follows:
•
Call up the setup mode with CTRL + BACKSPACE
The setup mode will be indicated by the flashing of the three
keyboard LEDs (NUM-Lock, CAPS-Lock, SCROLL-Lock) angezeigt.
•
For enabling press J
•
To disable the automatic hold function again press K
After the GET function is enabled/disabled the setup mode will be closed
automatically. The keyboard LEDs stop flashing.
You can always stop the entry by pressing
ESC .
Note: When double hotkeys are enabled (
see chapter 7.8 ), the defined double
hotkeys has to be pressed for calling up the setup mode.
14