Gullco GP-250 - Manual (Page 17)

15
KR-2000 WSB Same as above, except uses 1-1/2" [38.1mm] rack arms and rack boxes and
provides 7-1/2" [190.5mm] of vertical and 6-1/2" [165.1mm] of horizontal
adjustment.
NOTE: The above cutting torch and welding gun support assemblies can be, and often
are, equipped with one (1) or two (2) Gullco motorized rack arms controlled by a
remote joystick pendant. Ask your local Gullco representative for further details.
ALSO AVAILABLE:
Gullco frequently designs and manufactures custom welding systems, often utilizing the AutoCycle
welding positioner. These systems normally use some, or all of the following; a programmable logic
control, a programmable operator interface (that allows the user to easily adjust any of the timed
and counted preset values etc.), pneumatic or motorized slide/slides, interfacing with
welding/cutting equipment, external safety devices, auxiliary process equipment etc. Your local
Gullco representative would welcome the opportunity to discuss how we may assist in automating
your specific application.
Visit Gullco’s web site, “ www.gullco.com ”
to see, or request, more product and
application information.