Mounting instructions, Hanging instructions, External mounting isolation – Greenheck Modular Small Cabinet Fan (Model MSCF) (462888) User Manual

Page 4: Figure 4 figure 5 figure 3 figure 1, Figure 2

Modular Small Cabinet Fan

Hanging Bracket

Part No. 710774

Drawing No. 85537

Hanging Bracket

Part No. 710774

Drawing No. 85537

Bridge Bracket

Part No. 711779

Drawing No. 89814

One required per assembly

Bridge Bracket

Part No. 711779

Drawing No. 89814

One required per assembly

3/4 inch Flat Washer
One required per assembly

3/4 inch Flat Washer
One per assembly as needed

3/8-16x3/4 Spinlock Bolt
Two required per assembly

3.0 inch

3/8-16 Spinlock Nut
Two required per assembly

HANGING ASSEMBLY

BASE ASSEMBLY

Hanging Bracket

Part No. 710774

Drawing No. 85537

Hanging Bracket

Part No. 710774

Drawing No. 85537

Bridge Bracket

Part No. 711779

Drawing No. 89814

One required per assembly

Bridge Bracket

Part No. 711779

Drawing No. 89814

One required per assembly

3/4 inch Flat Washer
One required per assembly

3/4 inch Flat Washer
One per assembly as needed

3/8-16x3/4 Spinlock Bolt
Two required per assembly

3.0 inch

3/8-16 Spinlock Nut
Two required per assembly

HANGING ASSEMBLY

BASE ASSEMBLY

Mounting Instructions

Greenheck’s Modular Small Cabinet Fan (MSCF)
should be lifted by the factory supplied lifting lugs
(see Figure 1) or frame rails and a spreader bar
(see Figure 2) to prevent damage from occurring to
the equipment. Avoid twisting or uneven lifting of
equipment. Do not lift equipment by coil connections
or headers. The unit must remain upright during lifting.
All access doors and panels must be closed during
lifting to avoid damage.

Hanging Instructions

The MSCF should be hung by the factory supplied
lifting lugs or field supplied frame rails as shown
respectively in Figures 3 and 4. The number of
hanging brackets used will be determined by the
number of fan modules.

External Mounting Isolation

The MSCF is available with external neoprene or
spring isolation options. When external isolation is
selected, a bridge bracket will be provided to reduce
installation time (see Figure 5).

Figure 4

Figure 5

Figure 3

Figure 1

Lifting lugs

Spreader Bar

Frame Rails

(by others)

Figure 2

Spreader Bar