Grandstream GXV3240 User Guide - Manual (Page 73)

Firmware Version 1.0.3.37 GXV3240 User Guide Page 71 of 177
1) During the active call, tap on the right panel to make the second call. This will place
the current call on hold;
2) The second call establishes after the call is answered;
3) Press TRANSFER button to bring up transfer screen. The first call on hold will be displayed
such as ;
4) Select transfer mode as "Attended" in the transfer screen and tap on button such as
to transfer the call;
5) The call will be transferred, and GXV3240 will hang up the call.
Figure 47: Attended Transfer
Note:

To transfer calls across SIP domains, SIP service providers must support transfer across SIP domains;

If users would like to cancel the transfer, press button to go back to the previous talking screen.
6-WAY CONFERENCE
The GXV3240 supports up to 6-way conferencing on current firmware version 1.0.1.29.