Make phone calls, Register sip accounts, Account status – Grandstream GXV3240 User Guide User Manual
Page 55: Configure sip account, Figure 23: gxv3240 account widget
Firmware Version 1.0.3.37
GXV3240 User Guide
Page 53 of 177
MAKE PHONE CALLS
REGISTER SIP ACCOUNTS
The GXV3240 supports up to 6 independent SIP accounts, including a pre-configured IPVideoTalk account
registered on account 6. Users can make video calls and send messages to other IPVideoTalk accounts
registered on another GXV32xx/GXV31xx. Each account can have separate SIP servers, usernames and
NAT configurations.
ACCOUNT STATUS
On the idle screen, the account widget shows account name, number and registration status.
The following figure shows the accounts are successfully registered (account icon is green).
If the account icon is grey, it's still trying to register or unable to register.
If the users have enabled Shared Call Appearance on the registered account, the account icon will be
blue
.
Microsoft Lync account and Bluetooth handsfree profile account will be displayed here too (if any).
Figure 23: GXV3240 Account Widget
Note: Users may go to web UI -> Maintenance -
> Network Settings, uncheck “Show IP Address On
Account Widget” to hide the IP address of the phone.
CONFIGURE SIP ACCOUNT
To register SIP account, users could directly configure from phone's LCD menu->Settings->Advanced
Settings->Account. Or users could log in the GXV3240 web GUI->Account page to fill in the necessary
registration information, i.e., Account active, Account name, SIP Server, SIP User ID, SIP Auth ID, SIP Auth