Call transfer, Blind transfer, Figure 47: call function buttons – Grandstream GXV3275 User Guide User Manual
Page 76
Firmware Version 1.0.3.30
GXV3275 User Guide
Page 74 of 187
most. If select less than three options, it will automatically display the unchecked options in sequence
behind the selected ones. The default setting is "Hold", "Mute" and "Keyboard". For example, users go to
web UI -> Advanced Settings -> Call Features, select the function buttons from “Available” box, and move
to the right “Selected” box, to display the selected function buttons on call screen. As the figure shows below,
“Start Video”, “Transfer”, and “Conference” are selected and shown up on the call screen:
Note: The settings will not take effect immediately during the call.
Figure 47: Call Function Buttons
CALL TRANSFER
A call can be transferred to another party during the call. The GXV3275 supports blind transfer and attended
transfer.
BLIND TRANSFER
1.
During the active call, tap on "More" softkey.
2.
Select "Transfer" to bring up the transfer screen.
3.
Select transfer mode as "Blind" by tapping on the highlight area in
. The default
transfer mode is "Blind".
4.
Enter the digits.
5.
Tap on "Send" softkey.
6.
The call will be transferred and GXV3275 will hang up the call.