Grandstream GXV3275 User Guide - Manual (Page 60)

Firmware Version 1.0.3.30 GXV3275 User Guide Page 58 of 187
Figure 29: GXV3275 Programmable Keys
DIAL A NUMBER DIRECTLY
1. Use the methods mentioned above to open dial screen [Figure 28: GXV3275 Dial Screen] .
2. Select the account to dial out on the left panel of the dial screen. The selected account will be
highlighted in grey background.
3. Enter the digits to be dialed out using the keypad. If the digit matches call history, a list of numbers will
be displayed for users to select.
4. Tap on (audio call only) or (video call) to send the number. If no key is pressed, by default
the call will be automatically dialed out after 4 seconds timeout.
Note:

By default, the "No Key Entry Timeout" is 4 seconds, meaning if no key is pressed after starting entering
number, the call will be automatically sent out after the timeout. The timeout interval can be configured
under web GUI->Account->Call Settings.

GXV3275 allows users to press # key as SEND key. This behavior can be disabled via option "Use #
as Dial Key" under web GUI->Account->Call Settings.

When the user enters the digit on the dial screen, if there is digit matching call history, or contacts
name/number, the drop-down list will show the numbers. For example, if "John" is saved in the contacts,