Grandstream GXV3500 User Manual - Manual (Page 27)

GXV3500 Digital Video Encoder/Decoder
Firmware 1.0.1.38 Page 27 of 32
Grandstream Networks, Inc. 08/2011
Configure Motion Detection Time Schedule & Alarm Actions
This section allows you to configure the time during which the IP camera will monitor the
motion detection. The IP camera not only can monitor your settings but also can take actions
when the alarm is triggered.
IP camera System Log
This page is used to set up the system log server path and system log level. Once they are
correctly configured, the device will send out system log messages to the system log server,
which will help perform troubleshooting.
Syslog Server – The IP address or URL
of System log server.
Syslog Level – Select the device to
report the log level. Default is None. The
level is one of Debug, Info, Warning or
Error.
Dropdown list for date Available time schedules Monitored region