Grandstream GXV3500 User Manual - Manual (Page 26)

GXV3500 Digital Video Encoder/Decoder
Firmware 1.0.1.38 Page 26 of 32
Grandstream Networks, Inc. 08/2011
GXV3500 Motion Detection
The GXV3500 supports Motion Detection. To utilize this feature, please follow the below
steps:
1. Setup the motion detection monitored area.
2. Configure the motion detection time schedule.
3. Configure alarm action properly.
Setup Motion Detection Monitored Area
Enable Motion Detection – If this option is selected, motion detection will be enabled. If
something/somebody moves in the motion detection region, an alarm will be triggered.
Show Motion Detection Regions
– If this
option is selected, the motion detection regions
will be displayed on the screen with a white
border.
To Edit a Monitored Area
1. In the Select a Region dropdown list, select
the region ID.
2. Click Edit.
3. Click on the video, drag and draw you
preferred area.
4. Set the Sensitivity. Click the Save button to
save the sensitivity.
NOTE: The Sensitivity value varies from 0 to
100. The larger the value is, the higher the
sensitivity.
5. Click Save to save the settings.
To Remove a Monitored Area
1. In the Select a Region dropdown list, select the region you would like to remove.
2. Click Remove.
3. Click Save to save the changes.
The white border for Motion
Detection Regions
NOTE: If Upload to Alarm center
is checked for Alarm Actions, the
white border will
flash red when a
motion detection alarm is triggered.
Button to save sensitivity only