Grandstream GXV3500 User Manual - Manual (Page 10)

GXV3500 Digital Video Encoder/Decoder
Firmware 1.0.1.38 Page 10 of 32
Grandstream Networks, Inc. 08/2011
Configuring the GXV3500 via Web Browser
The GXV3500
‟s embedded Web server responds to HTTP/HTTPS GET/POST requests.
Embedded HTML pages allow you to configure your IP encoder/decoder through Microsoft
Internet Explorer.
Connect the Device to a DHCP server.
1. Navigate your browser to:
http://www.grandstream.com/support/gxv_series_surveillance/general/resources/gs_
search.zip
2. Run the Grandstream GS_Search tool, that you just downloaded.
3. Click on the button in order to begin device detection
4. The detected devices will appear in the Output field
5. Start Internet Explorer ® on your computer.
6. Enter the device IP in the address bar of the browser.
7. Enter the administrator user name and password to access the Web Configuration
Interface
8. The default user name and password are both set to admin.
9. Once you log into the GXV3500‟s web interface, the device will indicate that you need
to install or update the video plug in.
10. Save the VideoPlugine.exe file and run it on your computer. Then restart Internet
Explorer. You should get a confirmation message regarding the installation of the plug
in.
11. Once the installation of the plug in is completed, you will see the web page shown in
the screenshot on the next page. Click on the play button to view the video feed.