Using quick setup, Sing, Uick – Grandstream Synology User Manual
Page 9: Etup
Grandstream Networks, Inc.
Synology configuration guide
Page 9 of 20
IP cameras and IP Video Encoders
Last Update : 04/2013
Using Quick Setup
In Device Info window, enter your camera info as below
- Name: Name of the camera
- IP address: IP address of your camera
- Port: Keep default port 80
- Brand: Select Grandstream
- Camera model: Select your camera model from drop-down list
- Video format: Select video codec to be used on Primary Stream of the camera; H.264 or MJPEG
(if available)
- Audio format: Set G.711 to enable audio or set it to Disabled. If using MJPEG, audio will not be
available
- Username: Enter admin
- Password: Enter admin password
Once completed, press Test Connection to test your settings. If all settings are correct, a snapshot from your
camera will be displayed on the reserved area.
Press Finish button to finish the setup process
- Figure 10: Add Camera – Device Info page (Quick Setup) -