Grandstream Synology - Manual (Page 17)

Grandstream Networks, Inc. Synology configuration guide
Page 17 of 20
www.grandstream.com
IP cameras and IP Video Encoders
Last Update : 04/2013
L IVEVIEW A NALYTICS
1. In Surveillance Station Management tab, select the camera on which you want to configure Liveview
Analytics, and press Advanced button and select Liveview Analytics in the list.
2. Choose an analytics type from the Analytics Type drop-down menu:
• None: If None is selected, the other settings on this page will all be disabled.
• Motion Detection: Detect for movements in the specified areas.
• Missing Object: Detect if any objects in the specified areas are missing.
• Foreign Object: Detect if any foreign objects appear in the specific areas.
• Camera Occlusion: Detect when the camera lens is covered and unable to effectively
monitor the environment.
• Focus Lost: Detect when the camera focus is lost and unable to effectively monitor the
environment.
• No-Idle Zone: Detect if anyone or anything lingers in the restricted zone longer than the
time specified in Dwell time (sec.). Drag any of the four on-screen detection positions to
define your no-idle zone.
• Tally Counter: Detect and count the number of people or objects coming in and/or out of
the virtual boundary line from both/either direction with the Direction drop-down menu.
Drag either of the on-screen detection positions to adjust your boundary line. Calculation
will be conducted at the bottom-left corner of the screen. You may click Simulation to
have a preview of the liveview image.
• Virtual Fence: Detect if anyone or anything approaches the virtual fence from
both/either direction with the Direction drop-down menu. Drag either of the on-screen
detection positions to adjust your virtual fence.
3. Choose a sensitivity level from the Sensitivity drop-down menu. The higher the level is, the more sensitive
detection will be, and will be more likely to be triggered.
4. Choose a type of analytics area:
• Detection Zone (not applicable to Camera Occlusion, Focus Lost, No-Idle Zone, Tally
Counter, and Virtual Fence): Drag on the grid to define the analytics areas with the + or -
buttons. Or you can simply select or clear all areas by clicking Select All or Clear All.
- Figure 19: Management – Advanced > Liveview Analytics