Introduction, Access wavestore server, Ccess – Grandstream Wavestore User Manual
Page 3: Avestore server
Grandstream Networks, Inc.
WaveStore configuration guide
Page 3 of 16
IP cameras and IP Video Encoders/Decoders
Last Update : 04/2013
INTRODUCTION
The purpose of this document is to guide you to configure/monitor Grandstream IP cameras & IP Video
Encoders/Decoders using Wavestore server.
This guide is applicable to Wavestore version 5.18.876 and higher and to the following Grandstream IP
cameras (GXV3651_FHD, GXV3662, GXV3615WP_HD with firmware 1.0.1.71 or higher; GXV3615,
GXV3611_HD, GXV3611_LL, GXV3601, GXV3601_HD, GXV3601_LL with firmware 1.0.4.38 or higher) and
IP Video Encoders/Decoders (GXV3501 with firmware 1.0.4.38, GXV3504 with firmware 1.0.4.39 or higher;
GXV3500 with firmware 1.0.1.71 or higher – Decoding functionality is available on GXV3500 only)
Be aware that different firmware revisions may have different web interface formats and functionality.
A
CCESS
W
AVESTORE SERVER
Wavestore server can be reached from the server directly or from a different computer using “WaveView”.
1. Accessing from server directly :
a. Server : localhost
b. User name : install
c. Password : a
d. Connect to server group : Keep it checked
2. Accessing from a different computer using “WaveView” :
a. Server : IP address of your Wavestore server (i.e. 192.168.50.3)
b. User name : install
c. Password : a
d. Connect to server group : Keep it checked
- Figure 1: Login window (Wavestore server) -