Geist Upgradeable PDU - Manual (Page 38)

Upgradeable PDU Instruction Manual 38
© 2015 Geist GM1157 - GU PDU Instruction Manual
The Users section allows you to configure the various Read, Write, and Trap
communities for SNMP services. You can also configure the authentication types and
encryption methods used for the SNMP v3 communities, if desired.
Traps allows you to define the IP address(es) and SNMP types that you wish the
traps to be sent to.
To configure a trap destination:
1. Locate the Traps section of the SNMP page, and click on the Modify icon.
2. Enter the IP Address which the trap should be sent to, select the trap Version
to be used (v1, v2c, or v3), and click Save.