Geist Upgradeable PDU - Manual (Page 28)

Upgradeable PDU Instruction Manual 28
© 2015 Geist GM1157 - GU PDU Instruction Manual
4.1.2 Alarms & Warnings
The Alarms & Warnings page allows the user to establish alarm or warning conditions
(hereafter referred to as "Events") for each power and circuit readings. Events are
triggered when a measurement exceeds a user-defined threshold, either going above
the threshold ("high-trip") or below it ("low-trip"). Events are displayed in different
sections, based on the device or measurement the Event is associated with. Each
Event can have one or more Actions to be taken when the Event occurs.
1. State: Shows the status of each Event.
Empty: No alert condition.
: This symbol indicates that this particular "Warning" Event has been tripped.
A tripped Warning Event displays in orange.
: This symbol indicates that this particular "Alarm" Event has been tripped. A
tripped Alarm Event displays in red.
: This symbol will indicate that this Event has been acknowledged by user
after being tripped. It will remain this way until the condition being measured by
this Event returns to normal (i.e. ceases to exceed the trigger threshold for this
Event.)
2. Configuration: Add/Delete/Modify Alarms & Warnings.
: Add new Alarms & Warnings.
: Modify existing Alarms & Warnings.
: Delete Existing Alarms & Warnings.
3. Notification: Notify user of tripped Events, and request acknowledgment.
Empty: No alert condition.
: Acknowledge button. When a Warning or Alarm Event has occurred; the user