Technical support, Firmware version, Firmware updates – Geist Watchdog 100 User Manual
Page 24: Resetting the unit, Service and maintenance, More technical support
GM1118 - Watchdog 100 Series User Manual
24
Revision Date: 2/16/2015
Technical Support
Firmware Version
The firmware version is located in the upper right section of the web interface header, represented
by v3.y.xx. Before contacting support, it is recommended that the Watchdog 100 unit first be
updated to the latest firmware version. If this is not possible, please have the unit’s existing
firmware version number available when contacting technical support.
Figure 24: Web Page Header
Firmware Updates
Keep your unit updated with the latest firmware releases or sign up for notifications at the
following website:
Resetting the Unit
Should the Watchdog 100 unit loose communication; the processor may be manually rebooted
by pressing the ‘Reboot’ button on the face of the unit.
Service and Maintenance
No service or maintenance is required. Do not attempt to open the unit or you may void the
warranty. No serviceable parts inside.
More Technical Support
(800) 432-3219
Email: [email protected]
Or contact your distributor.