beautypg.com

Gate operator/canadian programming – Dodge 2008 Durango User Manual

Page 171

background image

6. Firmly press and release the “learn” or “training”
button. The name and color of the button may vary by
manufacturer.

NOTE:

There are 30 seconds in which to initiate the next

step after the “Learn” button has been pressed.

7. Return to the vehicle and press the programmed
HomeLink

௡ button twice (holding the button for 2 sec-

onds each time). If the device is plugged in and activates,
programming is complete.

If the device does not activate, press the button a third
time (for 2 seconds) to complete the training.

If you are have any problems, or require assistance,
please call toll-free 1–800–355–3515 or, on the Internet at
www.HomeLink.com for information or assistance.

To program the remaining two HomeLink

௡ buttons,

repeat each step for each remaining button. DO NOT
erase the channels.

Gate Operator/Canadian Programming

Canadian radio-frequency laws require transmitter sig-
nals to “time-out” (or quit) after several seconds of
transmission – which may not be long enough for
HomeLink

௡ to pick up the signal during programming.

1 — Garage Door Opener
2 — Training Button

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

171

3

This manual is related to the following products: