beautypg.com

Setting memory positions and linking remote, Keyless entry transmitter to memory – Dodge 2008 Durango User Manual

Page 132

background image

linked to either memory position. The memory system
can accommodate up to two transmitters, each transmit-
ter linked to either of the two memory positions.

Setting Memory Positions and Linking Remote
Keyless Entry Transmitter to Memory

NOTE:

Each time the SET (S) button and a numbered

button (1 or 2) are pressed, you erase the memory settings
for that button and store new settings.

1. Adjust the driver’s seat, recliner, and both side view
mirrors to the desired positions.

NOTE:

Not all motors may be moved at one time.

Please refer to the 8-way power seat description.

2. Adjust the brake and accelerator pedals to the desired
positions.

3. Turn on the radio and set the radio station presets (up
to 10 AM and 10 FM stations can be set).

4. Adjust the Automatic Temperature Control (ATC)
while the ATC is in Auto mode.

5. Press and release the SET (S) button located on the
driver’s door.

6. Within 5 seconds, press and release memory button 1
or 2 on the driver’s door. The next step must be per-
formed within 10 seconds if you desire to also use a
Remote Keyless Entry transmitter to recall memory po-
sitions.

7. Press and release the LOCK button on one of the
transmitters.

8. Insert the ignition key and turn the ignition switch to
the ON position.

9. Repeat the above steps to set the next memory posi-
tion using the other numbered memory button or to link
another Remote Keyless Entry transmitter to memory.

132

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

This manual is related to the following products: