GAMMA 5003 STRINGING MACHINE 2 POINT SC MOUNTING (Issue 5B - February 2014) - Manual (Page 11)

11
Tensioner Travel Stop
To prevent contact between the tension head
and the racquet and/or turntable, a travel stop
is located about midpoint along the tensioner
bar below the gear track. In the event the
tension head must be moved closer to the
racquet, pull and turn the travel stop 90 de-
grees. To re-engage the travel stop, simply
pull and turn the travel stop 90 degrees.
Travel Stop
STRINGING THE FRAME
Setting the Gripper Jaw Spacing
The gripper jaws of the tensioner are adjust-
able to accommodate varying string gauges.
If the string slips through the gripper jaws
while pulling tension, rotate the gripper jaw
adjustment screw counter-clockwise.
If the string is damaged while pulling tension,
rotate the gripper jaw adjustment screw
clockwise.
The jaws will be properly adjusted when
there is enough pressure to securely grip the
string without causing damage to the string.