Fusion MS-AV700i - Manual (Page 56)

55
Problem Solution
SiriusXM
When I press
the tuner source
button the
SiriusXM screen is
not displayed. Ensure you have the MS700i Tuner region set to ‘USA’. Press Menu >
Settings > Tuner region > and select ‘USA’.
Ensure the source is enabled. Select; Settings>Sources>Accessory then
select the source to enable SiriusXM.
• Ensure the SiriusXM module is plugged into the MS700i.
• Unplug the SiriusXM module and check the pins in the SiriusXM
plug are not damaged.
SiriusXM message:
‘Check Tuner’ • Ensure the SiriusXM module is plugged into the MS700i.
• Ensure the SiriusXM cable has not been damaged.
SiriusXM message:
‘Check Antenna’ • Ensure the antenna is plugged into the SiriusXM Tuner module.
• Ensure the antenna is not damaged.
• Ensure the antenna cable has not been damaged
SiriusXM message:
‘No Signal’. • Ensure the antenna is not damaged.
• Ensure the antenna has a clear view of the sky and is not obscured.
• Ensure the antenna cable has not been damaged
What is the best
way to prevent
corrosion on
my 700 Series
chrome finish? As with all products exposed to the harsh marine environment, a little
care will help to preserve the finish. FUSION recommends that you clean
any salt water and/or salt residue from the front panel with a damp
cloth soaked in fresh water.
APPENDICES
TROUBLESHOOTING
Problem Solution
General
The unit does not
respond to key
presses. • Reset the unit by pressing the Reset button inside the control panel door.
SiriusXM message:
‘Channel xx Not
Available’ A SiriusXM message informing you that the current channel is unavailable.
Possible causes are SiriusXM has removed the channel or your SiriusXM
subscription has changed.
• Contact SiriusXM to update your subscription.
• Online: Go to www.siriusxm.com/subscriptions
• Phone: Call 1-866-635-2349