Fusion MS-RA205 - Manual (Page 4)

4
INSTALLATION
Note: Appropriate mounting is very important to ensure correct operation. Select a location
that allows both free/open airflow around rear of chassis, whilst minimizing exposure to
moisture. Allow adequate room at the rear of the unit for the cable looms (approx 2”) and
underneath the unit (approx 2”) if using a SiriusXM tuner (USA Only).
If any modification to the vessel is required, such as drilling holes etc FUSION
recommends consultation with your boat dealer or manufacturer beforehand.
Create mounting hole for product and drill Screw Pilot Holes.
Refer to mounting template included with product or download
from www.fusionelectronics.com
• Fit mounting gasket
• Insert the unit into the mounting hole
• Use the supplied 4 x self tapping screws, to affix the unit into position.
• Attach screw covers
Note: The head unit must not be mounted on more than a 45˚ angle
from the horizontal plain. Failure to follow mounting restrictions
could void your warranty.
45˚