Fusion MS-RA205 - Manual (Page 16)

16
RADIO OPERATION
SOURCE SELECTION
Press the ‘Source’ button and cycle to desired source.
AM FM VHF AUX iPod MTP Device USB Bluetooth SiriusXM (USA only)
Note: Disconnected sources may not be displayed.
STATION SEARCH
Press ‘Play’ to cycle between tuning seek modes. Auto Manual Preset
AUTOMATIC SEEK TUNING
Press ‘Play’ to cycle to Auto tuning mode. Press the ‘Previous’ or ‘Next’ button to scan to the next station.
MANUAL SEEK TUNING
Press ‘Play’ to cycle to Manual tuning mode. Press the ‘Previous’ or ‘Next’ button to step up and down the
spectrum. Press & Hold the ‘Previous’ or ‘Next’ button for fast frequency/channel stepping.
PRESET TUNING MODE
Press ‘Play’ to cycle to Preset tuning mode. Press the ’Previous’ or ‘Next’ button to select
previous or next preset.
Note: Preset function is only available when more than one preset has been saved.
PRESETS
STORING A STATION AS A PRESET
When listening to a station/channel (AM/FM/VHF), press and hold the ‘Play’ button to store
preset. Alternatively: Press the ‘Menu’ button and select ‘Presets’. Select ‘Save Current’.
Note: There are 15 presets available per band.
VIEW PRESETS
Press ‘Menu’ and select ‘Presets’. Select ‘View Presets’. Use the ‘Rotary Encoder’ to cycle
and select a saved preset.
REMOVE PRESET
Press ‘Menu’ and select ‘Presets’. Select ‘Remove Preset’. Select the desired preset.
REMOVE ALL PRESETS
Press ‘Menu’ and select ‘Presets’. Select ‘Remove All Presets’.
vHF OPERATION
SQUELCH
Press ‘Menu’ and select ‘Squelch’.
Increase Squelch to filter out background noise.
SCAN
Press ‘Menu’ and select ‘Scan’.
The Marine Stereo will scan the VHF preset stations for an active channel.
It remains on the channel until the transmission ends, then resumes scanning.
Press any button to interrupt. This function is disabled if no presets have been stored.
See above for an explanation of saving presets.
Note: If the Squelch control is adjusted so you can constantly hear background noise the unit will
not scan correctly.
MAN000002C