Data and status message display – Fronius String Control 250/30 User Manual
Page 39

37
EN
Data and status message display
Data display
The latest Fronius String Control 250/30 data can be found at:
Anlagen / [Name of the system] / Aktuell / String Control
Status codes
Status codes generated by the Fronius String Control 250/30 are sent to the Datalogger.
The Datalogger responds in the same way as for a status code generated by the inverter.
Status codes can also be sent by SMS, fax or e-mail. You will find further information in the
'Fronius DATCOM Details' operating instructions.
The Fronius String Control 250/30 service codes are State 901 to 905. These service
codes indicate an excessive deviation in measuring channels 1 to 5.
We recommend that you activate the output comparison in the "Settings - General" menu.
This provides you with a list of service codes each time data is downloaded from the Da-
talogger to the PC. This list provides a brief overview of all the messages from the inverter
and the Fronius String Control 250/30.