Foxconn P4M9007MB-8EKRS2H User Manual
Page 33
Chapter 3 BIOS Description
27
v
First/Second/Third Boot Device
This option allows you to set the boot device’s sequence.
v
Boot Other Device
With this function set to enable, the system will boot from some other de-
vices if the first/second/third boot devices failed. The setting values are: Dis-
abled and Enabled.
v
Boot Up NumLock Status
This item defines if the keyboard Num Lock key is active when your system is
started. The available setting values are: On and Off.
v
Security Option
When it is set to “Setup”, a password is required to enter the CMOS Setup
screen; When it is set to “System”, a password is required not only to enter
CMOS Setup, but also to start up your PC.
v
MPS Version Control For OS
This option is used to set up the version of MPS Table used in OS.
v
Delay For HDD(secs)
This option is used to set the delay time of selecting the HDD controller.
v
Full Screen LOGO Show
This option allows you to enable or disable the full screen logo. The available
setting values are: Disabled and Enabled.
v
Small Logo (EPA) Show
This item allows you to enable or disable the EPA logo.