Foxconn P4M9007MB-8EKRS2H - Manual (Page 17)

Chapter 2 Installation Instructions
11
Power Supply
This motherboard uses an ATX power supply. In order to avoid damaging any
devices, make sure that they have been installed properly prior to connecting
the power supply.
24-pin ATX power connector: PWR1
PWR1 is the ATX power supply connector. Make
sure that the power supply cable and pins are
properly aligned with the connector on the
motherboard. Firmly plug the power supply cable
into the connector and make sure it is secure.
8-pin ATX_12 V Power Connector: PWR2
The 8-pin ATX 12V power supply connects to
PWR2 and provides power to the CPU.
1
4
5
8
Connect a 4-pin
power plug here
Note:
We recommend that you use 8-pin ATX_12V
power supply. If you want to use 4-pin power
supply, connect the 4-pin power connector as
shown.
24-pin ATX Power Connector
24 13
+3.3V
-12V
NC
+5 V GND GND GND
PSON
+5V
+3.3V GND
+12V
GND
+5V_AUX
+ 3 . 3 V
+5V
+12V
GND +5V
+3. 3V
GND GND
+5 V
12
PWROK
1
8-pin ATX_12 V Power Connector
1
4
5
8
G N D 12V
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn