Foxconn 975X7AB-8EKRS2H - Manual (Page 50)

Chapter 3 BIOS Description
43
PnP/PCI Configurations
PnP/PCI Configurations Menu
v Init Display First
This option is used to set which display device will be used first when your PC
starts up.
v Reset Configuration Data
This option is used to set whether the system is permitted to automatically
distribute IRQ DMA and I/O addresses when each time that the machine is
turned on. The setting values are: Disabled and Enabled.
v IRQ Resources
Press the key, then manually set IRQ resources.
v PCI/VGA Palette Snoop
If you use a non-standard VGA card, use this option to solve graphic accelera-
tion card or MPEG audio card problems (e.g., colors not accurately displayed).
The setting values are: Disabled and Enabled.
v Maximum Payload Size
This option is used to set maximum TLP payload size for PCI Express devices.
The unit is byte.
PDF 文件使用 "pdfFactory" 试用版本创建 Æ Æ www.fineprint.com.cn