Foxconn 975X7AB-8EKRS2H User Manual
Page 47
Chapter 3 BIOS Description
40
v
ACPI function
ACPI stands for “Advanced Configuration and Power Interface”. ACPI is a
standard that defines power and configuration management interfaces be-
tween an operating system and the BIOS. In other words, it is a standard that
describes how computer components work together to manage system
hardware. In order to use this function the ACPI specification must be sup-
ported by the OS (for example, Windows2000 or WindowsXP). The available
setting values are: Enabled and Disabled.
v
ACPI Suspend Type
This option is used to set the energy saving mode of the ACPI function.
W hen you select “S1 (POS)” mode, the power will not shut off and the
supply status will remain as it is, in S1 mode the computer can be resumed
at any time. When you select “S3 (STR)” mode, the power will be cut off after
a delay period. The status of the computer before it enters STR will be saved
in memory, and the computer can quickly return to previous status when the
STR function wakes. W hen you select “S1 & S3” mode, the system will
automatically select the delay time.
v
Run VGABIOS if S3 Resume
This option allows the system to initialize the VGABIOS from S3 (Suspend to
RAM) sleep state. The available setting values are: Auto, Yes and No.
v
Soft-Off by PWRBTN
This option is used to set the power down method. This function is only valid
for systems using an ATX power supply.
When “Instant-Off” is selected, press the power switch to immediately turn
off power.
W hen “Delay 4 Sec” is selected, press and hold the power button for
four seconds to turn off power.
Power Management Setup Menu
Power Management Setup
PDF 文件使用 "pdfFactory" 试用版本创建