Foxconn 975X7AB-8EKRS2H User Manual
Page 12
5
Chapter 1 Product Introduction
Triple RAID Solution (optional)
Onboard RAID controllers provide the motherboard with triple RAID functionality
that allows you to select the best RAID solution using IDE or serial ATA devices.
The Intel
®
ICH7R chipset supports for RAID 0, 1, 5, 0+1 and Matrix Storage
Technology. It allows different RAID usages to address specific needs and
usages.
The Jmicron
®
Jmb361 supports one external Serial ATA connector for RAID 0, 1.
FOX ONE Technology
The FOX ONE is a fully compliant ACPI controller IC specific for Intel CPU platform.
This chip operation mode (sleep or active) is selectable through some control
signals. The FOX ONE provides 3 switching signals which can generate 5VDUAL,
5VUSB & 3.3VDUAL etc. This chip integrates a charge pump engine to provide
higher driving voltage for appropriate gate during standby. On the other hand, this
chip offers current limiting that protect each PWM outputs, and provides soft-start
for linear regulator to avoid rush current. The power LED is programmable and
compliant with PC2001. Moreover, this high-performance chip integrates all of
the control, output adjustment, monitoring and protection functions into a single
package.
Dynamic Overclocking Show Function
This motherboard is specially designed to show the levels of dynamic overclocking
by four onboard power LED. The function is controlled by Turbo0 and Turbo1
control signals which are operated by FOX ONE chip. You can overclock your PC
via BIOS setting or FOX ONE utility provided by FOXCONN and watch the state of
the power LED to get the information of your overclocking.
Power LED Status
Overclocking Status
LEVEL1
LEVEL2
LEVEL3
LEVEL4
LEVEL1 LEVEL2 LEVEL3 LEVEL4
Light
Light Light
Light Light Light
Light Light Light Light
PDF 文件使用 "pdfFactory" 试用版本创建