Foxconn 975X7AB-8EKRS2H User Manual
Page 44
Chapter 3 BIOS Description
37
v
Delay For HDD (Secs)
You can select a delay from 1 to 15 seconds in the cold boot process.
v
IDE HDD Block Mode
This option is used to set whether the IDE HDD block mode is allowed.
v
IDE DMA transfer access
This option is used to set the IDE transfer access—with it set to Enabled, the
IDE Transfer Access uses the DMA mode; with it set to Disabled, the IDE
Transfer Access uses the PIO mode.
v
On-Chip Primary PCI IDE
Use this item to enable or disable the Primary/Secondary PCI IDE channel
that is integrated on the motherboard.
v
SATA Mode
This option is used to set the Serial ATA Mode. The available setting values
are: IDE, RAID, AHCI.
v
On-Chip Serial ATA
This option is used to set the On-chip Serial ATA function.
v
SATA PORT Speed Settings
This option is used to set SATA port speed settings.
v
PATA IDE Mode
When On-Chip Serial ATA set as “Combined Mode”, this option will be modified.
It is used to set the PATA IDE Mode. The available setting values are: Primary,
Secondary.
v
SATA Port
This option is used to set the Serial ATA Port.
OnChip IDE Device Menu
PDF 文件使用 "pdfFactory" 试用版本创建