Foxconn 975X7AA-8EKRS2H-RAID User Manual

Page 24

RAID User’s Guide

3) VASSTEK BIOS RAID Configuration (optional)

A. Setting RAIDm1 mode
a. Attach the HDD you would like to set RAIDm1 as Master device.
b. Boot up the system.
c. No matter the HDD is new or you have ever used, VASRAID would detect it is a

ATA Mode and shows ”ATA mode is detected!”
Press key within 5 seconds as a bar is rotating.

d. Show [Warning !] message.

Press “Y” as asking “Are you sure?(Y/N)” to make sure you would like to set
Master HDD as RAIDm1 mode.

e. Press "Y" again as asking "Are you really sure?(Y/N)" to reconfirm you want to

set RAIDm1 mode.

f. "RAIDm1 mode had been built done!" message shows done.

B. Returning to ATA mode
a. Boot up the system.
b. The screen displays ”RAIDm1 mode is detected!”

Press key within 5 seconds as a bar is rotating.

c. Show [Warning !] message.

Press “Y” as asking “Are you sure?(Y/N)” to make sure you would like to set
Master HDD as RAIDm1 mode.

d. Press "Y" again as asking "Are you really sure?(Y/N)" to reconfirm you want to

set ATA mode.

e. "ATA mode had been built done!" message shows done.

PDF 文件使用 "pdfFactory" 试用版本创建