Foxconn 975X7AA-8EKRS2H-RAID User Manual

Page 17

Text mode
Original mode

RAID User’s Guide

g. After the RAID set size is set, the message “Are You Sure (Y/N)?” will display

before completing the configuration. Answer “N” to abort the creation of the new
RAID set, or “Y” to proceed with the RAID set creation.

h. RAID sets can be created in both BIOS and in the SATARaid5 GUI. If you have

excess capacity left on your hard drives after creating a RAID set in the BIOS, you
can later go to the SATARaid5 GUI to create additional logical drives that fully
utilize the capacity on all your hard drives.

d. If manual configuration is selected, the chunk size of Striped Sets can be

selected. For Mirrored Sets, the Source and Target drives can be selected.

e. If auto configuration is selected, BIOS will select RAID member drives auto

matically and the chunk size of Striped Sets is set to 64KB.

f. Select RAID set size with

↑

and

↓

keys.

PDF 文件使用 "pdfFactory" 试用版本创建