Foxconn 45CMX User Manual
Page 33
Chapter 2 BIOS Description
27
4.2 PEG/Onchip VGA Control
This item is used to enable or disable PEG and onboard VGA.
4.3 PEG Force X1
When enabled, the PCI-E x16 slot will be forced to work in the PCI-E x1 mode.
When disabled, the PCI-E x16 slot will be allowed to work in the PCI-E x16
mode.
Note: This item is only available when external display card is installed.
4.4 On-Chip Frame Buffer Size
This item is used to set the VGA frame buffer size.
Note: This item is only available when onboard VGA is used.
4.5 DVMT Mode
This item is used to set the DVMT mode.
Note: This item is only available when onboard VGA is used.
4.6 DVMT/FIXED Memory Size
This item is used to set the DVMT/FIXED memory size.
Note: This item is only available when onboard VGA is used.
4.7 Boot Display
This item is used to select the display type used when your PC starts up. The
available setting values are: Auto, CRT, TV and EFP.
Note: This item is only available when onboard VGA is used.
4.8 Init Display First
This item is used to select the initial display device used when your PC starts
up.
4.9 PCI Express x1 Port
This option is used to enable or disable PCI Express x1 slot .
4.10 PCI-E Compliancy Mode
This option is used to select PCI-E compliancy mode.
4.11 Maximum Payload Size
This option is used to set maximum TLP payload size for PCI Express devices.
The unit is byte.
PDF 文件使用 "pdfFactory" 试用版本创建