Foxconn 45CMX User Manual
Page 32
Chapter 2 BIOS Description
26
3.7 Boot Other Device
When enabled, the system will boot from some other devices if the first/
second/third boot devices failed.
3.8 Boot Up Floppy Seek
This option controls whether the BIOS checks for a floppy drive while booting
up. If it cannot detect one (either due to improper configuration or physical
unavailability), it will appear an error message.
3.9 Boot Up NumLock Status
This item allows you to select the power-on status for the NumLock. The
available setting values are: On and Off.
3.10 Security Option
When it is set to “Setup”, a password is required to enter the CMOS Setup
screen; When it is set to “System”, a password is required not only to enter
CMOS Setup, but also to start up your PC.
3.11 APIC Mode
This option is used to enable or disable APIC function.
3.12 Delay For HDD (Secs)
This option is used to set the delay time of selecting the HDD controller.
3.13 Full Screen LOGO Show
This option allows you to enable or disable the full screen logo.
3.14 Small Logo (EPA) Show
This item allows you to enable or disable the EPA logo.
4.Advanced Chipset Features
Advanced Chipset Features Menu
4.1
System/ Video BIOS Cacheable
Select ”Enabled” to allow caching of the system/video BIOS which may im-
prove performance. If any other program writes to this memory area, a system
error may result.
PDF 文件使用 "pdfFactory" 试用版本创建