Foxconn 45CMX User Manual
Page 28
Chapter 2 BIOS Description
22
Use
time and date.
1.2 IDE Channel 0/1/2/3 Master/Slave
These categories identify the HDD types of 1 IDE channel installed in the
computer system. There are three choices provided for the Enhanced IDE
BIOS: None, Auto, and Manual. “None” means no HDD is installed or set;
“Auto” means the system can detect the hard disk and select the HDD mode
automatically when booting up; by choosing “Manual” and changing Access
Mode to “CHS”, the related information should be entered manually. Enter the
information directly from the keyboard and press < Enter>:
1.4
Halt On
This category determines whether or not the computer will stop if an error
is detected during powering up.
1.3 Drive A
This option allows you to select the kind of FDD to be installed, including
[None], [360K, 5.25 in], [1.2M, 5.25 in], [720K, 3.5 in], [1.44M, 3.5 in] and
[2.88 M, 3.5 in].
All Errors
Whenever the BIOS detects a nonfatal error, the system
will stop and you will be prompted.
No Errors
The system boot will not stop for any errors that may
be detected.
All, But Keyboard
The system boot will not stop for a keyboard error; but
it will stop for all other errors.
All, But Diskette
The system boot will not stop for a diskette error; but
it will stop for all other errors.
All, But Disk/Key
The system boot will not stop for a keyboard or disk
error; but it will stop for other errors.
Award (Phoenix) BIOS can support 3 HDD modes: CHS, LBA and Large.
Cylinder
number of cylinders
Head number of heads
Precomp
write pre-compensation Landing Zone landing zone
Sector
number of sectors
Note: Set to [Auto] , the system can detect the hard disk and select the
HDD mode automatically when booting up. Suggest you select this option.
CHS For HDD<528MB
LBA For HDD>528MB & supporting LBA (Logical Block Addressing)
Large For HDD>528MB but not supporting LBA
PDF 文件使用 "pdfFactory" 试用版本创建