Foxconn 915M03-G-8EKRS2 - Manual (Page 67)

Chapter 3 BIOS Description
59
915M03 Series User Manual
v Wake up On LAN (Default: Enabled)
This option is used to set the system to wake up by onboard Lan. The setting
values are: Disabled and Enabled.
v
USB KB/MS WakeUp From S3 (Default: Disabled)
This option is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode. The setting values are Disabled and Enabled.
v Resume by Alarm (Default: Disabled)
This option is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be canceled. Also, the PC power
source must not be turned off. The setting values are Disabled and Enabled.
v Date (of Month) Alarm
When the Resume by Alarm set as “Enabled”, this option will be modified. It is
used to set the timing for the start-up date. The setting values
contain 0 - 31.
v Time (hh:mm:ss) Alarm
When the Resume by Alarm set as “Enabled”, this option will be modified. It is
used to set the timing for the start-up time. The setting values contain hh:0 –
23; mm:0 – 59; ss:0 – 59.
v
PS/2 MS WakeUp S3/S4/S5 (Default: Disabled)
This option is used to set the wake up by PS/2 mouse. The setting values are:
Disabled, Any Actions, Double Click.
v
PS/2 KB WakeUp S3/S4/S5 (Default: Disabled)
This option is used to set the wake up by PS/2 keyboard. The setting values
are: Disabled, Hot KEY, Any KEY, Keyboard 98.
v
Hot Key WakeUp (Default: Ctrl-F1)
When the PS/2 KB Wake Up S3/S4/S5 set as Hot KEY, use this item to set the
hot key combination that turns on the system. The available setting values
are: Ctrl+F1-F12.