Foxconn 915M03-G-8EKRS2 - Manual (Page 35)

Chapter 2 Installation Instructions
27
915M03 Series User Manual
S/PDIF Out Connector: SPDIF_OUT
The S/PDIF out connector is capable of providing digital audio to external speak-
ers or compressed AC3 data to an external Dolby digital decoder.
Note:The empty pin of SPDIF cable should be aligned to empty pin of S/PDIF
out connector.
Chassis Intruder Connector: INTR
The connector connects to the chassis security switch on the case. The system
can detect the chassis intrusion through the status of this connector. If the con-
nector has been closed once, the system will send a message. To utilize this
function, set “Case Open Warning” to “Enabled” in the “PC Health Status” section
of the CMOS Setup. Save and exit, then boot the operating system once to make
sure this function takes effect.
INTR
1
INTRUDERJ
GND
SPDIF_OUT
1
SPDIF_OUT
+5V
GND
Empty