Foxconn 915M03-G-8EKRS2 - Manual (Page 63)

Chapter 3 BIOS Description
55
915M03 Series User Manual
Power Management Setup
v
PCI Express PM Function
Press to set the item of PCI Express PM function. Please refer to
page 58.
Note: This option is applicable when PCI x1 LAN card has been installed to
PCI Express x1 slot.
v ACPI Function (Default: Enabled)
ACPI stands for “Advanced Configuration and Power Interface”. ACPI is a
standard that defines power and configuration management interfaces be-
tween an operating system and the BIOS. In other words, it is a standard that
describes how computer components work together to manage system
hardware. In order to use this function the ACPI specification must be sup-
ported by the OS (for example, Windows 2000 or Windows XP). The available
setting values are: Enabled and Disabled.
v
ACPI Suspend Type (Default: S1 (POS))
This option is used to set the energy saving mode of the ACPI function.
When you select “S1 (POS)” mode, the power will not shut off and the power
supply status will remain as it is. In S1 mode the computer can be resumed
at any time. When you select “S3 (STR)” mode, the power will be cut off after
a delay period. The status of the computer before it enters STR will be saved in
memory, and the computer can quickly return to previous status when the STR
function wakes. When you select “S1 & S3” mode, the system will automatically
select the delay time.
v
Run VGABIOS if S3 Resume (Default: Auto)
This option allows the system to initialize the VGABIOS from S3 (Suspend to
RAM) sleep state when you select “S3 (STR)” mode in the above option . The
available setting values are: Auto, Yes and No.
Power Management Setup Menu