Foxconn 915M03-G-8EKRS2 - Manual (Page 56)

Chapter 3 BIOS Description
48
915M03 Series User Manual
v
Memory Hole At 15M-16M (Default: Disabled)
This option is used to determine whether the 15M-16M address field of memory
is reserved for the ISA expansion card. The available setting values are: En-
abled and Disbled.
v
PCI Express Root Port Func
Press to set the items of PCI Express root port function. Please refer
to page 49.
v PEG/Onchip VGA Control (Default: Auto)
Set this option as “Onchip VGA”, if you want to use onboard VGA; set this
option as “PEG Port”, if you want to used PCI Express x16 graphics card; set
as Auto, BIOS will auto-detect and enable the device you used. The available
setting values are: Onchip VGA, PEG Port, Auto.
v
PEG Force X1 (Default: Disabled)
This option is used to set PCI Express x16 graphics card to PCI Express x1
graphics card . The available setting values are: Disabled, Enabled.
Note: This item will be shown and modified when you use PCI Express x16
device .
Note: The following items will be shown and modified when you use onboard
VGA .
v
On-Chip Frame Buffer Size (Default: 8 MB)
This item is used to set the VGA frame buffer size. The available setting values
are: 1MB, 4MB, 8MB, 16MB, 32MB.
Note: This function does not work when the external display card is used.
v
FIXED Memory Size (Default: 64MB)
This item is used to set the fixed memory size for onboard VGA . The available
setting values are: 0MB, 32MB, 64MB, 128MB.
v DVMT Memory Size (Default: 64MB)
This item is used to set DVMT (Dynamic Video Memory Technology) memory
size. DVMT ensures the most efficient use of available system memory re-
sources for maximum 2D/3D graphics performance. The available setting
values are: 0MB, 32MB, 64MB, 128MB.