Foxconn 915M03-G-8EKRS2 - Manual (Page 14)

Chapter 1 Product Introduction
6
915M03 User Manual
ATX 12V connector
This power connector connects the 4-pin 12V plug from the ATX 12V power
supply.
CPU socket
LGA 775 Socket T is for the Intel ® Prescott-T processor.
North Bridge controller
Intel ® 915G/P/GV supports FSB 800/533 MHz, DDR2 533/400 MHz, PCI Express
x16 (only for 915G/P). Intel ® 915G/GV provides an integrated graphics
accelerator.
DDR DIMM solts
These four 240-pin DIMM slots support up to 4 GB system memory using
unbuffered non-ECC DDR2 533/400 DIMMs.
ATX power connector
This 24-pin connector connects to an ATX power supply. The power supply
must have at least 1A on the +5V standby lead (+5VSB).
Floppy disk connector
This connector accommodates the provided ribbon cable for the floppy disk
drive. One side of the connector is slotted to prevent incorrect insertion of the
floppy disk cable.
IDE connector
The IDE connector supports Ultra DMA 100/66, PIO Modes 3 & 4 IDE device.
The connector is slotted to prevent incorrect insertion of the IDE ribbon cable.
Flash ROM
This 4Mb flash ROM contains the programmable BIOS program.
1
2
3
4
5
6
7
8