Foxconn M7PMX Series User Manual

Page 29

All Errors

Whenever the BIOS detects a nonfatal error, the system will stop

and you will be prompted.

No Errors

The system boot will not stop for any errors that may be

detected.

All, But Keyboard The system boot will not stop for a keyboard error; but it will stop

for all other errors.

All, But Diskette

The system boot will not stop for a diskette error; but it will stop

for all other errors.

All, But Disk/Key The system boot will not stop for a keyboard or disk error, but it

will stop for all other errors.

CHS

For HDD <528MB

LBA

For HDD >528MB & Supporting LBA (Logical Block Addressing)

Large

For HDD>528MB but not supporting LBA

Award (Phoenix) BIOS is supporting 3 HDD modes : CHS, LBA and Large.

Note: Set to [Auto] , the system can detect the hard disk and select the HDD mode

automatically. Suggest you select this option.

► Drive A

This option allows you to select which kind of the Floppy Disk Drive is installed in your system.
It can be [None], [360KB, 5.25 in], [1.2MB, 5.25 in], [720KB, 3.5 in], [1.44MB, 3.5 in] and
[2.88MB, 3.5 in].

► Halt On

This category determines whether or not the computer will stop if an error is detected during

powering up.

► Model Name

This item shows the model name.

► BIOS ID

This item shows the information of the BIOS ID.

► BIOS Version

This item shows the BIOS version.

► CPU Name

This item shows the CPU name installed in you system.

► Memory

This item shows the information of the system memory, determined by POST(Power-On Self-
Test) of the BIOS.

► MAC Address

This item shows the MAC (Media Access Control) address.