Foxconn 915P7MC-S - Manual (Page 37)

Chapter 3 BIOS Description
30
Advanced BIOS Features
™ CPU Feature
Press to set the items of CPU feature. Please refer to page 31.
™ Hard Disk Boot Priority
This option is used to select the priority for HDD startup. After pressing ,
you can select the HDD using the / or Up/Down arrow
keys, and change the HDD priority using <+> or <->; you can exit this menu by
pressing .
™ Virus Warning (Default: Disabled)
Allows you to choose the VIRUS warning feature for IDE hard disk boot sector
protection. If this function is enabled and someone attempt to write data into
this area, BIOS will show a warning message on screen and an alarm will
beep. The setting values are: Disabled and Enabled.
Note: Such function provides protection to the start-up sector only; it does
not protect the entire hard disk.
™
Hyper-Threading Technology (Default: Enabled)
This option is used to turn on or off the Hyper-Threading function of the CPU.
The available setting values are: Disabled and Enabled.
Note: This function will not be displayed until a CPU that supports Hyper-
Threading has been installed.
™ First/Second/Third Boot Device (Default: Floppy/Hard Disk/CDROM)
This option allows you to set the boot device sequence. The available setting
values are: Floppy, LS120, Hard Disk, CDROM, ZIP100, USB-FDD, USB-ZIP,
USB-CDROM, LAN and Disabled.
Advanced BIOS Features Menu