Foxconn 915A01-P-8EKRS2 - Manual (Page 67)

Chapter 3 BIOS Description
59
915A01 Series User Manual
Wake up On LAN (Default: Enabled)
This option is used to set the system to wake up by onboard Lan. The setting
values are: Disabled and Enabled.
USB KB/MS WakeUp From S3 (Default: Disabled)
This option is used to set the system to wake up by USB equipment when it is
in S3 (Suspend to RAM) mode. The setting values are Disabled and Enabled.
Resume by Alarm (Default: Disabled)
This option is used to set the timing of the start-up function. In order to use this
function, the start-up password function must be cancelled. Also, the PC power
source must not be turned off. The setting values are Disabled and Enabled.
Date (of Month) Alarm
When the Resume by Alarm set as “Enabled”, this option will be modified. It is
used to set the timing for the start-up date. The setting values contain 0 - 31.
Time (hh:mm:ss) Alarm
When the Resume by Alarm set as “Enabled”, this option will be modified. It is
used to set the timing for the start-up time. The setting values contain hh:0 –
23; mm:0 – 59; ss:0 – 59.
PS/2 MS WakeUp S3/S4/S5 (Default: Disabled)
This option is used to set the wake up by PS/2 mouse. The setting values are:
Disabled, Any Actions, Double Click.
PS/2 KB WakeUp S3/S4/S5 (Default: Disabled)
This option is used to set the wake up by PS/2 keyboard.The setting values
are: Disabled, Hot KEY, Any KEY, Keyboard 98.
Hot Key WakeUp (Default: Ctrl-F1)
When the PS/2 KB Wake Up S3/S4/S5 set as Hot KEY, use this item to set the
hot key combination that turns on the system. The available setting values are:
Ctrl+F1-F12.