Foxconn 915A01-P-8EKRS2 - Manual (Page 14)

Chapter 1 Product Introduction
6
915A01 User Manual
ATX 12V connector
This power connector connects the 4-pin 12 V plug from the ATX 12 V power
supply.
CPU socket
LGA 775 Socket T is for the Intel ® Prescott-T processor.
North Bridge controller
Intel ® 915G/P supports FSB 800/533 MHz, DDR2 533/400 MHz, PCI Express
x16. Intel ® 915G provides an integrated graphics accelerator.
DDR DIMM slots
These four 240-pin DIMM slots support up to 4 GB system memory using
unbuffered non-ECC DDR2 533/400 DIMMs.
ATX power connector
This 24-pin connector connects to an ATX power supply. The power supply
must have at least 1 A on the +5 V standby lead (+5 VSB).
Floppy disk connector
This connector accommodates the provided ribbon cable for the floppy disk
drive. One side of the connector is slotted to prevent incorrect insertion of the
floppy disk cable.
IDE connector
The IDE connector supports Ultra DMA 100/66, PIO Modes 3 & 4 IDE device.
The connector is slotted to prevent incorrect insertion of the IDE ribbon cable.
Serial ATA connectors (optional)
These six 7-pin connectors accommodate the thin cables for Serial ATA
devices.
1
2
3
4
5
6
7
8