Foxconn 915A01-P-8EKRS2 - Manual (Page 10)

Chapter 1 Product Introduction
2
915A01 User Manual
Main Features
Size
ATX form factor of 12 inch x 9.6 inch
Microprocessor
Supports Intel ® Prescott-T processor in an LGA775 package
Supports FSB at 533 MHz/800 MHz
Supports Hyper-Threading technology
Supports FSB Dynamic Bus Inversion (DBI)
Chipset
Intel ® 915G/P (North Bridge) + ICH6/6R (South Bridge)
System Memory
Four 240-pin DIMM slots
Supports Dual-Channel DDR2 400/533
Supports up to 4 GB of DDR2 memory
Supports 256-Mb, 512-Mb, 1-Gb technologies for x8 and x16 non-ECC,
unbuffered DIMMs only
Registered DIMMs not supported
USB 2.0 Ports
Eight USB 2.0 ports (four rear panel ports, two onboard USB headers
providing four extra ports)
Supports wake-up from S1 and S3 mode
Supports USB 2.0 Protocol up to 480 Mbps transmission rate
Onboard Serial ATA (optional)
150 MBps transfer rate
Supports up to six S-ATA devices (optional)
Supports RAID 0, RAID 1, RAID 0+1, Matrix RAID (supported on ICH6R)